PLA Resin /
PLA Resin SPL-101
- Product CodeSPL-101
- AppearanceColorless translucent granule
- CAS No.9051-89-2
- HS Code3907700000
- Shelf Life2 years
- Technical Data Sheet
Properties
Typical Value
Testing Standard
Density g/cm³
1.24
GB/T1033.1-2008
Melt Index (190℃) g/10min
3-6
GB/T3682.1-2018
Melting Point ℃
≥ 160
GB/T19466.3-2004
Glass Transition Temp. ℃
58-60
GB/T19466.2-2004
L - Optical Purity %
≥ 90
-
Lactide Monomer %
≤ 0.3
-
Moisture %
≤ 0.05
GB/T37191-2018
Tensile Strength Mpa
≥ 45
GB/T1040.1-2018
Elongation At Break %
≥ 2.0
GB/T1040.1-2018
- Applications
Material characteristics: The low light pure L-lactide product is synthesized from L-lactide with optical purity of more than 90%. Because of its low crystallinity, the product can present high transparency and general flexibility. It is especially suitable for products with high transparency and low melting point requirements.
Applicable processing methods: Extruded products such as film, sheet, fiber, 3D printing, etc.
Application recommendation: For packaging products and injection moulded parts with high requirements on transparency, such as fresh food pallets, salad boxes and plastic wrap; for fibers, two-component fibers and flexible fibers which need lower melting point to achieve hot bonding; not suitable for products with high heat resistance requirements.
- Pakaging Details
25kg/bag, 800kg/bag, 850kg/bag, 1000kg/bag vacuum aluminum foil bags
- Storage Conditions
Store at room temperature in a cool and dry place, keeping the original packaging sealed.
To prevent the decrease in viscosity and loss of performance during processing, it is recommended that the moisture content be below 50 ppm. Typical drying conditions: 80℃ for 4-6 hours.
